DeLOCK 64253 Manual Del Usuario página 4

English
M.2 NVMe SSD
1.
Put your M.2 module into the slot.
2. Fix the module with the help of the rubber nipple.
3. Connect the USB cable with the enclosure and a free USB port of your
computer.
4.
Set the switch to the required on the converter.
5.
Switch on the converter.
6.
The power lights up blue.
7. Switch on your computer.
8. The external drive will be recognized and you can start using the device
immediately.
9.
The LED lights up white permanently and flashes when there is activity.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 09/2023
-4-