Publicidad
Idiomas disponibles
Idiomas disponibles
ERROR TYPE
E10
compartment is not
E11
compartment is too
If you are experiencing a problem with your refrigerator, please check the following before
contacting the after-sales service.
Your refrigerator does not operate
Check if:
• Your fridge is plugged in and switched on
• The fuse has blown
• Is the temperature adjustment right?
• The socket is faulty. To check this, plug another working appliance into the same socket.
Your refrigerator is performing poorly
Check if:
• Is the temperature adjustment right?
• Is the door of your fridge opened frequently and left open for a long while?
• The appliance is overloaded
• The doors are closed properly
• Did you put a dish or food on your fridge so that it contacts the rear wall of your fridge
so as to prevent the air circulation?
• Is your fridge filled excessively?
• There is an adequate distance between the appliance and surrounding walls
• Is the ambient temperature within the range of values specified in the operating manual?
MEANING
Likely to occur after:
Fridge
- Long term power
failure.
cold enough
- Hot food has been left
in the fridge.
Fridge
cold
WHY
1. Set the fridge temperature to
2. Please empty the location
If this warning continues an
authorised technician needs to be
contacted.
1. Check is Super Cool mode is
2. Reduce the fridge compartment
Various
3. Check to see if vents are clear
If this warning continues an
authorised technician needs to be
contacted.
EN -31-
WHAT TO DO
a colder value or set Super
Cool. This should remove the
error code once the required
temperature has been reached.
Keep doors closed to improve
time taken to reach the correct
temperature.
at the front area of air duct
channel holes and avoid putting
food close to the sensor.
activated
temperature
and not clogged
Publicidad
