Descargar Imprimir esta página

Bosch GSR 18V-21 Professional Manual Original página 16

Ocultar thumbs Ver también para GSR 18V-21 Professional:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
16 | English
Cordless Drill/Driver
Recommended rechargeable batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery GBA 18V 2.0Ah.
B) Measured with GBA 18V 1.5Ah and GBA 18V 12Ah.
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-1.
GSR 18V-21
Typically, the A-weighted sound pressure level of the power
tool is 73 dB(A). Uncertainty K = 5 dB. The noise level when
Vibration total values a
(triax vector sum) and uncertainty K determined according to EN 62841-2-1.
h
Drilling
a
h
K
Impact drilling
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
1 609 92A 87N | (29.09.2022)
GSR 18V-21
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
working can exceed the volume stated. Wear hearing pro-
tection!
GSB 18V-21
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 88 dB(A); sound power level
99 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
GSR 18V-21
2
m/s
<2.5
2
m/s
1.5
2
m/s
2
m/s
Charging the Battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
Do not continue to press the On/Off switch after the
u
power tool has automatically switched off. The battery
can be damaged.
Removing the Battery
The battery (7) is equipped with two locking levels to pre-
vent the battery from falling out when pushing the battery re-
lease button (8) unintentionally. As long as the battery is in-
serted in the power tool, it is held in position by means of a
spring.
To remove the battery (7), press the release button (8) and
pull the battery out of the power tool. Do not use force to
do this.
GSB 18V-21
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
GSB 18V-21
<2.5
1.5
11
1.5
Bosch Power Tools

Publicidad

loading

Este manual también es adecuado para:

Gsb 18v-21 professional0 601 9h1 176