Publicidad
Idiomas disponibles
Idiomas disponibles
In the programmed
edit recording
function
the tracks
can be
programmed
while checking
the remaining
time on each side of
the tape as the tracks are programmed.
m
The programmed
edit recording will not start from a point halfway
in the tape. The tape must be recorded
on from the beginning
of
either side.
1
2
3
4
5
Insert the tape into deck 2.
Insert the tape with the side to be recorded
on first facing out
from the unit.
Press
CD and
load the disc(s).
Press EDIT/CHECK
twice while pressing SHIFT
on the remote control.
"EDIT" and "PRGM"
are displayed.
c When "Al" is displayed,
press
EDIT/CHECK
while pressing
SHIFT
again.
Press numbered buttons on the remote control
to designate the tape length.
10 to 99 minutes can be specified.
The -,
>
or
MULTI JOG
are also available to designate
the tape length.
Tape length
Tape side A (front side)
Maximum
recording
time for side A
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press numbered buttons O-9 and + 10 on
the remote control to program a track.
Example:
To select
the 10th track
of disc 2, press
DISC
DIRECT PLAY 2,
then press
+10
and O.
Remaining
time
Programmed
on side A
tracks
L
6
7
8
9
Repeat step 5 for the rest of the tracks for side!
~
A.
ill
,3 ~
,~::miij
A track whose playing time is longer than the remaining
time
~~; ~
cannot be programmed.
8
,>,,:
~,. ,
.,
':;/
::S":
Press EDIT/CHECK while pressing SHIFT on the!
,#
remote control to select side B and program the
tracks for side B.
After confirming
B on the display, repeat step 5.
Tape side B, (reverse side)
Press EDIT/CHECK
while pressing
SHIFT
select side A and press
REC/REC MUTE
start recording.
to
to
CD play and recording
of edited tracks for the first side start
simultaneously.
When the last track programmed
for side A
is finished,
deck 2 enters
the recording
stop mode. After
entering
the recording
stop mode, go to step 9.
Press EDIT/CHECK while pressing SHIFT on tht?
remote control for recording of the second side.
B is displayed.
10 Turn over the tape in deck 2 and press
REC/
REC MUTE to start recording.
Recording
starts.
To stop recording
Press
, Recording
and CD play stop simultaneously.
To
check the order of the programmed
track numbers
Before recording,
press
EDIT/CHECK
while pressing
SHIFT
on
the remote control to select side A or B, and press -
or N>
repeatedly.
Disc number
Tape side
Program
number
Track number
Programmed
track
numbers
To change the program of each side
Press EDIT/CHECK
while pressing
SHIFT on the remote control
to select side A or B, and press 9 CLEAR
to clear the program
on the selected
side. Then program tracks again.
To clear the edit program
Press
CLEAR
twice so that "EDIT" disappears
on the dlispla.y.
ENGLISH
14
Publicidad
