Publicidad
Know Your Pressure Washer
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with
the location of various controls and adjustments.
Save this manual for future
reference.
Air Filter
Lever
Multi-Peg
Wand
High
Pump
Chemical
High
Pressure
PRESSURE
WASHER
High Pressure Pump (located
inside the shroud):
Increases the
pressure of the water supply.
Engine: Drives the high pressure
pump.
High Pressure Hose: Carries the
pressurized water from the pump to
the gun and wand.
Spray Gun: Connects with wand to
control water flow rate, direction, and
pressure.
Multi-Peg
Wand: Has a spray nozzle
which adjust from a pencil stream (0 °)
to a wide angle fan spray (40°). The
spray can be adjusted by twisting the
nozzle clockwise
and/or
counterclockwise.
Also, the high and
low pressure settings can be con-
trolled by moving the nozzle in and
out. See Operation section.
Chemical
Hose: Allows cleaners or
cleaning solvents to be mixed with
the pressurized water stream. See
How To Siphon Chemicals/Cleaning
Solvents in Operation section of this
manual.
ENGINE
Choke Control:
Opens and closes
the choke valve in carburetor.
Throttle Control Lever: Controls
engine speed.
Starter
Grip:
Pulling starter grip
operates recoil starter to crank
engine.
Fuel Valve Lever: Opens and closes
connection
between fuel tank and
carburetor.
D25852
10- ENG
Publicidad
