Publicidad
Idiomas disponibles
Idiomas disponibles
Taking Photos:
Once your Lomomatic 110 is loaded with a battery and film, slide open the camera to
turn it on and you are ready to shoot!
1.
Select the ISO according to your film using the [4] ISO Setting Button.
2.
Look through the [9] Viewfinder to compose your photo, then press the [10]
Shutter Release Button. The exposure will be automatically adjusted by the
camera.
3.
After you have taken a photo, slide the camera toward the closed position
until you feel some resistance, then slide into the open position to advance
the film. Once the film moves to the next frame number in the [8] Frame
Indication Window, you are ready for your next photo.
4.
If you would like to stop shooting and close the camera, make sure you first
slide the camera toward the closed position until you feel resistance and
open it fully again before sliding it fully closed. Once you have completed this
step, you can open and close the camera as many times as you like without
triggering the film advance mechanism.
5.
When you finish the last frame of the film cassette (most likely frame 24),
slide the camera closed and open a few more times to ensure the film is fully
advanced into the cassette.
8
Publicidad
