LORCH ML Serie Instructivo De Servicio página 28

2 Precautionary statements
2.1 Designated use
2.2 Obligations of the operator
EN - 4
• The device described in these instructions may be used only for the
purpose and in the manner described in these instructions. In doing so,
observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are
not permitted.
• Store the operating instructions within easy reach of the device for
reference and enclose them when passing on the product.
• Commissioning, operating and maintenance work may only be carried out
by qualified personnel. Qualified personnel are persons who, based on
their special training, knowledge and experience, are able to assess the
tasks assigned to them and identify possible dangers (in Germany see
TRBS 1203).
• Keep other people out of the work area.
• Please observe the accident prevention regulations of the relevant country.
• Ensure the work area is well lit and keep it clean.
Observe the following standards and guidelines in particular:
• 89/391/EEC: Directive on the introduction of measures to encourage
improvements in the safety and health of workers at work.
• 2009/104/EC: Directive concerning the minimum safety and health
requirements for the use of work equipment by workers at work.
• 2004/108/EC: Directive on the approximation of the laws of the Member
States relating to electromagnetic compatibility.
• EN 60974-1: Arc welding equipment, Part 1: Welding power sources
• DIN EN 60974-4: Arc welding equipment, Part 4: Periodic inspection and
checking
• EN 60974-7, Point 7.4.2: Arc welding equipment, Part 7: Torch
• DIN EN 60974-9: Arc welding equipment, Part 9: Installation and use
• DIN EN 60974-10: Arc welding equipment, Part 10: Electromagnetic
compatibility (EMC) requirements
• Occupational health and safety regulations of the relevant country. For
example, Germany: Arbeitsschutzgesetz (Occupational Health and Safety
Act) and Betriebssicherheitsverordnung (Ordinance on Industrial Safety
and Health)
• Regulations on occupational safety and accident prevention
MIG/MAG welding torches ML/MW GRIP