Publicidad
Idiomas disponibles
Idiomas disponibles
Changing the lights:
Remove the grease filter.
Way 1. Use a tool or the hand to press the spring splinterof both sides of LED light
to the inside, until the light is pressed out, see pic 1.Then slightly pull the light
connecting wire out, and dismantle the terminal of the light connecting wire. See
pic 2.
Way 2.Use straight screwdriver to prize up the LED light bottom edge, see pic 3,
then slightly pull out the LED light and light connecting wire. See pic 2.
Apply the reverse procedure to install the light back.
• ILCOS D code for this lamp is: DSS-1.5/65-S-120/33
– LED modules –rectangle LED lamp
– Max wattage: 1×1.5W
– Voltage range: DC 12V
– Dimensions:
Publicidad
