Model NO.
919-152142
Max. Developed
HP
2
Bore
47.625
Stroke
31.75
Voltage-Single
Phase
120V
Minimum
Branch Circuit Requirement
10 amps
Fuse Type
Time Delay
Air Tank Capacity
4
Approx. Cut-In
120
Approx. Cut-out
150
SCFM @ 40 psig
3.7
SCFM @ 90 psig
2.6
[-.'Y.,I _1 _ I_'d[€-lJ] Im]=1 IqI_I ::_'_.,I m] = 1 _11 _1i II[e _]_._
This manual contains
information
that is important
for you to know and understand.
This information
relates to protecting YOUR SAFETY and PREVENTING
EQUIPMENT
PROBLEMS.
To help you
recognize this inforrnation_ we use the symbols
below. Please read the manual and pay attention
to
these sections.
_lndicates
an
imminently hazardous
situation which, if not avoided, will
result in death or serious injury.
_t_lndicates
a potentially
hazardous situation
which, if not avoided, could result in
death or serious injury.
_l_'_lndicates
a potentially
hazardous
situation
which,
if not avoided,
_
result in
minor or moderate
injuw.
_Used
without
the
safety alert symbol
indicates a potentially
hazardous
situation
which, if not avoided,
may
result in oroDertv
damaoe.
IhSl_o]-'IL,1+hd b"Y.'_l_"_'d _[IP,[.._l_o]n/[o _]P,[..+
SAVE THESE INSTRUCTIONS
IMPROPER
OPERATION
OR MAINTENANCE
OF THIS PRODUCT
COULD
RESULT IN
SERIOUS
INJURY
AND
PROPERTY
DAMAGE.
READ
AND
UNDERSTAND
ALL
WARNINGS AND OPERATING INSTRUCTIONS
BEFORE USING THIS EQUIPMENT.
Some dust created by power sanding,
sawing, grinding,
drilling, and other
construction
activities contains
chemicals
known (to the State of California) to
cause cancer, birth defects or other reproductive
harm. Some example
of these chemicals
are:
lead from lead-based
paints
crystalline
silica from bricks and cement
and other masonry products
arsenic and chromium
from chemically*treated
lumber
Your risk from these exposures
varies, depending
on how often you do this type of work. To reduce
your exposure
to these chemicals:
work in a well ventilated
area, and work with approved safety
equipment,
always wear MSHA/NIOSH
approved,
properly
fitting face mask or respirator
when using
such tools.
When using air tools, basic safety precautions
should
always be followed
to reduce the risk of of
personal injury.
3* ENG
D27445