Descargar Imprimir esta página

Maytag Precision Touch Control 800 Guía De Uso Y Cuidado página 17

Ocultar thumbs Ver también para Precision Touch Control 800:

Publicidad

Idiomas disponibles

Idiomas disponibles

5
Adjusting the Oven Temperature
Oven temperatures are carefully tested for a_-curacyat the
factory. It is normal to notice some baking or browning
differences between a new oven and an oHdone. As ovens
get oHder,the oven temperature can shift.
You may adjust the oven temperature if you think the oven is
not baking or browning correctHy. To decide how much to
change the temperature, set the temperature 25° higher or
Howerthan your recipe recommends, then bake. The resuHts
of the "test" shouM give you an idea of how much to adjust
the temperature.
TO adjust
the oven
temperature:
1. Press the Bake pad.
2. Enter 550° by pressing the appropriate number pads.
3. Press and hoHdthe Bake pad for severaHseconds or untiH
0° appears in the display.
If the oven temperature was previously adjusted, the
change will be displayed. For example, if the oven tem-
perature was reduced by 15° the display will show "-15 °''.
4. Press the Aatoset 0 pad to adjust the temperature.
Each time the Aatoset 0 pad is pressed, the temperature
changes by 5°. The oven temperature can be increased or
decreased by 5° to 35°.
Pressing the Aatoset 0 pad will first cycle through
increasing the oven temperature (5, 10.... 35]. Continuing
to press the Aatoset 0 pad will then cycle through
decreasing the oven temperature (-35, -30 .... -5:).
5. The time of day will automatically reappear in the display.
You do not need to readjust the oven temperature if there is a
power failure or interruption. Temperature adjustment applies
to Bake, Convect Bake and Convect Roast only. Broiling and
cleaning temperatures cannot be adjusted.
The Favorite pad allows you to save the time and temperature
from Cook & Hold function.
To set a Favorite cycle, a Cook & Hold function must be either
active or just programmed.
To set a new Favorite
cycle or to save a cur-
rentJy running
Cook & HoJd as a Favorite:
1. Program a Cook & Hold cycle as described in the Cook &
Hold section on page 12.
2. Press and hold the Favorite pad for three
seconds.
° The newly set or currently running Cook & Hold cycle
will be saved.
° A beep will sound to indicate that the control has
accepted the Favorite setting.
To start a cycle programmed
into Favorite:
1. Press the Favorite pad.
° Time and temperature for the set Cook & Hold cycle will
be displayed. (If no Cook & Hold cycle has been
programmed, "nonE" is displayed.)
2. Press Bake, Conveet Bake or Conveet Boast,
° The Favorite cycle will begin immediately,
° The selected cycle word will light in the display.
° The cooking time will light in the display.
When the cooking
time has elapsed:
° The sdected cycle word will turn off.
° HOLD and WARM will light.
° 170°will display.
To canoe! a Favorite
eycJe in progress:
1. Press the CANCEL pad.
° The stored Favorite cycle wi]] not
be affected.
2. Remove food from the oven.
16

Publicidad

loading