Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1 Attach
handle
\\
Remove cardboard
(A) and screws
from handle section. Discard card-
board.
Open tool cover on cleaner body
(B).
Remove powered hand tool (some
models).
Make sure that the switch is in the
OFF position.
Slide handle section onto back of
handle.
Push screws into holes on back of
handle.
Tighten screws securely with a
Phillips screwdriver.
Remove powered hand tool (some
models) from plastic bag and return
it to the tool storage area.
Remove switch lock (C) above ON/
OFF switch (D) by pulling it straight
out. Dispose of switch lock.
If switch lock has come off during
assembly, make sure switch is in
OFF position (down) before plug-
ging into electrical outlet.
Publicidad
