Publicidad
Idiomas disponibles
Idiomas disponibles
Familiarize
yourself with these home
maintenance
tasks asproper u seand
care ofyourcleaner will e nsure c ontin-
uedcleaning e ffectiveness.
Dirt cup
The dirt cup assembly consists of the
following parts:
Lid (A)
Dirt Cup (B)
Pre-filter (C)
HEPA Cartridge Filter (D)
Dirt Inlet Opening (E)
While the cleaner is in operation, the pre-
filter screen will stop larger debris from
entering the HEPA cartridge filter chamber.
This larger debris will be seen collecting in
the left side of the dirt cup. The HEPA car-
tridge filter will collect fine particles that
have passed through the pre-filter screen.
When
to empty
It is recommended that the dirt cup be
emptied before the dirt reaches the dirt
inlet opening on back of dirt cup (Fig. 3-1)
or after every use if preferred.
CAUTION:
Very fine materials, such
as face powder, cornstarch
or fire-
place soot, may seal the filter and
cause loss of suction.
When using
the cleaner for this type of dust,
empty the cup and clean the filters
often.
How
to empty
Disconnect cleaner from electrical
outlet. Do not use cleaner without dirt
cup or filters
in place.
Push latch (F) to the left to unlock.
Lift cup slightly and pull straight
out to
remove from cleaner.
Remove lid.
Note: It is not necessary to remove the
HEPA cartridge filter to empty the dirt
cup.
Tap side of cup until no more dust
particles fall from the HEPA cartridge
filter.
B5.1
G
Replace dirt cup lid.
Slide cup straight
into cleaner cavity.
Bottom of cup will rest behind grooves
at bottom of cleaner cavity (G).
Push latch (F) to the right to lock in
place.
Filter
assembly
The HEPA cartridge filter and pre-filter
are essentially self-shedding.
Tapping the side of the dirt cup as
described
in "How to empty dirt cup"
should sufficiently remove dust and fine
particles from the HEPA cartridge filter
and pre-filter.
The filter assembly can also be removed
for additional
cleaning.
How
to clean
filter
assembly
Remove dirt cup and dirt cup lid as
described
in "How to empty dirt cup."
Grasp pre-filter frame and pull up firmly.
Slide filter assembly out of cup.
Publicidad
