Publicidad
Idiomas disponibles
Idiomas disponibles
EN
L
Please note that your legs are massaged one after the other by the
inflating and deflating air cushions, not simultaneously. The pressure
is built up firstly in one leg cuff and then in the other. This is not a sign
that the device is faulty!
After Use
Once you have finished use, the air must be removed from the leg cuffs.
1. Set the pressure control to the highest level.
2. Switch off the device by pressing the On / Off button. The control lamp goes
out.
3. Unplug the air-tube connection plug from the top socket on the control unit.
CLEANING AND CARE
PLEASE NOTE!
■ Keep the device in a place which is protected from direct sunlight and ex-
treme temperature fluctuations.
■ Do not use any caustic or abrasive cleaning agents to clean the device.
These could damage the device.
•
Before cleaning, always remove the air tubes from the leg cuffs and from
the control unit.
•
The leg cuffs can be cleaned with a slightly damp cloth and some house-
hold detergent. If the leg cuffs are used for more than one person and if
they come into direct contact with the skin, you should disinfect the cuffs
with a standard disinfectant to avoid cross contamination. It is imperative
that you make sure that no moisture enters the air inlet and outlet
openings.
34
4. Now connect the plug for the air tubes to the con-
nection on the side of the control unit.
5. Switch on the device by pressing the On / Off but-
ton. The On / Off control lamp lights up as soon as
the device is turned on. The air is now pumped out
of the leg cuffs.
6. Once the air has been pumped out, open the zip
and remove the leg cuffs.
7. Switch off the device by pressing the On / Off but-
ton.
8. If you used the mains adapter, unplug it from both
the mains socket and the device.
Publicidad
