Descargar Imprimir esta página

Arbonia TECNA KOSMO Instrucciones De Instalación página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT INFORMATION
PLEASE READ THESE INSTRUCTIONS
THOROUGHLY BEFORE COMMENCING
INSTALLATION
This product carries a
against faulty materials and manufacturing
defects. The warranty does not cover any
defect arising from damage, negligence,
usage outside the products intended or fair
wear and tear. The warranty does not cover
pinholes or other issues caused by insufficient
cleansing or protection of the central heating
system.
Regular cleaning with a soft cloth will keep
the surface of your product looking new.
Soapy water can be used to remove stubborn
marks. Do not use abrasive or chemical
cleaners as these will damage the surface
finish over time.
STEP 1
Screw the Blank Plug and the Air Vent Plug into the top two threads in the upright channels. The Air Vent Plug can
be fitted on either side. Tighten firmly with a 22mm or adjustable spanner.
STEP 2
Wind a thick layer (at least 6 turns) of PTFE tape, clockwise around the radiator valve tails (not supplied) and screw
the radiator valve tails into the bottom two threads in the upright channels and tighten firmly.
STEP 3
Check that the wall is strong enough to hold the weigh t of the towel rail filled with water. On plasterboard walls
we strongly recommend fixing to the timbers. Mark your preferred bracket positions on the wall and drill holes for
the fixings you intend to use. The Wall Plugs supplied are only suitable for solid walls and you will need alternative
fixings for other wall types.
STEP 4
Screw the Bracket Bases to the wall using the Washers & Wall Screws provided or alternative fixings. The Grub
Screws should be facing downward.
5-year
warranty
INSTALLATION
INSTRUCTIONS
KOSMO
PLEASE CHECK THAT ALL ANCILLARY
COMPONENTS ARE PRSENT AND THAT
THE PRODUCT HA SNO SUFFERED ANY
DAMAGE DURING TRANSIT
Installation should be carried out by a
suitable qualified professional or other fully
competent person and in accordance with
the relevant British and European standards
(BS7593:1992, EN12828:2003, EN12831:2003,
EN14336:2004) and all applicable Building
Regulations.
When drilling or fixing into walls, floors, or
ceilings it is essential that you check for
pipes and wires before commencing. Please
ensure that you wear all necessary personal
protective equipment.

Publicidad

loading