Arbonia TECNA KOSMO Instrucciones De Instalación página 8

STEP 5
Screw the Bracket Stems into the threads on the back of the towel rail.
STEP 6
Align the Bracket Stems with the Bracket Bases and push the towel rail back into position.
STEP 7
Hold the towel rail back against the wall and tighten the Grub Screws with the Hexagon Key provided.
STEP 8
Connect the radiator valves (not supplied) and fill the system to check for leaks and repair any leaks as necessary.
STEP 9
Flush the entire central heating system with a DWTA approved central heating cleanser, carefully following the
manufacturer's instructions.
STEP 10
Alter thoroughly flushing the entire central heating system, refill adding a DWTA approved central heating protector,
carefully following the manufacturer's instructions.
STEP 11
Run the central heating system up to full temperature and release any trapped air using the Air Vent Plug and the
installation is finished.
Ancillary Components
4 Wall Plug (a)
4 Bracket base (b)
4 Washer (c)
4 Wall screw (d)
4 Bracket stem (e)
4 Mini screw (f)
1 Hexagon key (g)
Maximum working pressure of this radiator is 4 bar. This radiator is to be used on Domestic Central Heating systems
only. (Not suitable for use on direct hot water systems). Please consult your supplier.
INSTALLATION
INSTRUCTIONS
KOSMO
(e) (d) (c) (b)
(f)
(g)
(a)