Kicker 19435808 Instrucciones página 4

Install the supplied threaded clips. Fig. 4
Install the amplifier mounting bracket through the right of center hole and secure with the tailgate handle
bolts and the two supplied bolts. Fig. 5
Re-attach the wire retainers to the amplifier bracket
Note: Make sure no wires are pinched between the amplifier bracket and tailgate.
front of vehicle
Install the amplifier onto the amplifier bracket with the supplied screws (short screws x 4). Fig. 6
Install the light kit harness if purchased separately. Fig. 7
Fold the inner tailgate section down and snap loose the plastic hinge cover on the passenger side to aid in
harness routing. Fig. 8
Disconnect the negative battery cable.
Connect the amplifier harness to the amplifier and circuit board. Fig. 9
Fig 4
Fig 6
Fig 5
Light Kit
Connection
Fig 7
4