Filter Icon: Orange light shows when the filter requires changing. See the
instructions for replacing the Aqua Optima Evolve+ filter cartridge in section 3.
Set up, first use and cleaning.
Refill Icon: Orange light shows when the water tank needs refilling (Non
interactive).
Rinse/Descale Icon: A solid oOrange light shows when appliance requires a rinse
cycle performing. Press and hold the button for 0.5 seconds to start the rinse
cycle. A flashing orange light indicates the machine requires descaling. Press
and hold the button for greater than 3 seconds to enter descale mode. See the
descale procedure in section 5. Descaling.
3. Set up, first use and cleaning
BEFORE USING THE AURORA APPLIANCE FOR THE
FIRST TIME
• Remove all packaging. There is a clear film covering the
display, this can be removed.
• Remove the tank lid and extract the inner water tank and
water tank. Wash rinse and dry thoroughly.
• Prepare filter as per the instructions.
PREPARING THE AQUA OPTIMA EVOLVE+ WATER
FILTER CARTRIDGE
Aqua Optima is a unique water filtration system developed
to deliver filtered water quickly.
1. Remove all packaging from the filter
cartridge. There may be a small residue
of black carbon particles in the bag
or adhering to the cartridge body;
this is normal. These particles are
harmless and are washed off during the
preparation process.
2. Soak the cartridge in a bowl of water for
5-10 minutes to remove all air bubbles (A).
3. Flush for 1 minute under a running tap (B).
4. The filter cartridge is now ready for use.
SET UP THE APPLIANCE AS PER THE INSTALLATION
INSTRUCTIONS IN SECTION 6. OF THIS MANUAL
1. Using the tank handle lift the water tank from the
appliance. Take out the inner water tank.
2. Ensure the seal ring is installed correctly.
3. Fit the Aqua Optima water filter
cartridge into the underside of the inner
water tank, rotating clockwise to lock
into place (A). Ensure it is firmly secure.
4. Reinsert the inner water tank into the
water tank.
5. Attach the power cord to the socket at
the base of the appliance (B).
6. Fill the water tank through the lid to the
"MAX" with cold tap water and allow the
water to filter through to the main tank.
Refill the water tank to "MAX" with cold
tap water and refit the water tank into
the appliance.
7. Place drip tray and drip tray plate on the
front of the appliance (C).
8. Place jug or vessel under the dispense outlet.
9. Plug the power cord into the mains socket and turn on.
10. Using the On/Off button turn the appliance on.
11. Press & hold Rinse button for 0.5 seconds.
12. Select the 35fl oz. / 1035ml dispense volume.
13.Press the dispense button to start dispensing, Repeat
this twice so that 105fl oz. / 3105ml are discarded.
14. Your appliance is now ready to use.
CLEANING
• ATTENTION: NEVER PLACE THE APPLIANCE BODY,
PLUG OR POWER CORD IN WATER OR OTHER LIQUIDS;
ALWAYS WIPE CLEAN WITH A DAMP CLOTH.
• Always switch off and unplug appliance before cleaning
• Ensure the appliance is cool before cleaning.
A
• Wash, rinse and dry the inner water tank, water tank and
the tank lid regularly, at least when the filter cartridge is
replaced.
• Wash the drip tray with soapy water. Rinse all soap away
with clean water. Allow to air dry.
B
• Do not use scouring pads, solvents or abrasives to clean as
they may damage the appliance.
• The inner water tank, water tank, tank lid and drip tray are
1 Min
not dishwasher proof.
• For hygiene and safety reasons you should always clean
the inner water tank, water tank and tank lid if it has been
unused or in storage for longer than 2 weeks.
REPLACING THE AQUA OPTIMA EVOLVE+ FILTER
CARTRIDGE
An orange light will show on the control panel when the filter
requires changing.
A
This appliance is only intended for use with Aqua Optima
Evolve+ filters.
1. Drain the water from the tanks and remove the tank lid.
2. Take out the inner water tank and remove the filter
cartridge by rotating it anti-clockwise.
B
3. Insert the new filter cartridge as described previously.
4. Reinsert the inner water tank into the water tank. Fill the
water tank up to the max line and refit the water tank into
the appliance.
5. Dispense water to remove any unfiltered water in the
C
appliance and top up.
6. Press and hold the filter warning symbol for 3 seconds to
reset the filter timer.
7. The appliance is now ready to use.
3