VEVOR KJ-AT25F Manual Del Usuario página 7

Note: The installation must be carried out by professionals according to the
instructions.
UNPACKING YOUR ICE MAKER
1.Remove all exterior and interior packaging materials. Check whether all
the below accessories are included or not. If any parts are missing, please
contact our customer service. After you unpack the machine, we
recommend you to leaving it for 24 hours before turning it on.
2.Clean the interior with lukewarm water and a soft cloth or clean the unit
using the Self-Clean function.
3.Find a location for your ice maker where it's protected from direct sunlight
and other sources of heat (i.e. stove, furnace, radiator). Place the ice
maker on a level surface. Make sure that there is at least 5 inches of space
between the back and sides of your ice maker and the wall.
4.Allow one hour for the refrigerant to settle before plugging the unit for
initial use.
5.The appliance must be positioned where the plug is accessible.
Package Contents
Ice maker machine x 1
- 6 -