Publicidad
Idiomas disponibles
Idiomas disponibles
Fanaway Brisbane Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main
circuit panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire
strands or connections.
Fig. 15
ELECTRICAL WIRING DIAGRAM
9.
Turn the connecting nuts upward and push the wiring
into the outlet box.
10. Carefully insert the Remote Receiver above the hanger ball in
the remainder spacing in the mounting bracket. Take care not to
damage or loosen any of the wiring.
Fig. 16
1.
Connect the household live supply
wire (black) to receiver input wire (black, AC
IN L) as shown in Fig. 15.
2.
Connect the household neutral
supply wire (white) to the receiver input wire
(white, AC IN N).
3.
Connect the household ground
wire to the fan bracket ground wire (green)
and fan body ground wire.
4.
Connect the reveiver output wire
(black, TO MOTOR L) to motor live input wire
(black, TO MOTOR L).
5.
Connect the receiver output wire
(white, TO MOTOR N) to motor neutral input
wire (white, TO MOTOR N)
6.
Connect the receiver output wire
(blue, FOR LIGHT) to fan light live input wire
(blue, FOR LIGHT)
7.
Pull the metal safety cable on the
security hook, tight the safety cable (Fig.15 &
Fig.16)
8.
After connecting the wires, spread
them apart so that the green and white wires
are on one side of the outlet box and the
black and blue wires are on the other side.
9 | P a g e
Publicidad
