JCMaster BEAUTY JDK6 Manual Del Usuario página 5

How to use the machine
1. Insert the nail drill bit, connect the handle to the host, and then connect the
power supply.
2. Turn on the nail drill (You will hear a ''click'' sound).
3. Press on
(Clockwise/ Counterclockwise).
4. Turn the rotating speed controller slowly toward clockwise to increase the
speed.
5. Turn the rotating speed controller slowly toward counterclockwise to decrease
the speed.
6. Press on
rotating speed.
How to change the drill bits:
1. Turn the twist-lock to the left to unlock the drill bit.
2. Pull out the original bit and insert the desired bit (2.35mm).
3. Turn the twist-lock to the right to lock the drill bit.
to change the rotational direction
then the handle will stop running, press again to reactivate the
R:Unlock the bit
S:Lock the bit
*Do not turn the twist-lock
while the handle is running
03