INSTALLATION
DANGER: Overhead mounting requires extensive experience, including the calculation of the
load limit values of the installation material and regular safety inspection of all installation
materials and devices. If you do not have these qualifications, do not attempt to perform
an installation yourself. Refer instead to a qualified professional. There is a risk that devices
that are incorrectly mounted and secured may come loose and fall down. This can cause
serious injury or death.
Before installation, make sure that the amplifier system to which the speaker is to be
connected is switched off and that the connection cables are de-energised!
Mount the speaker in a suitable position on a sufficiently stable surface.
1
Outdoor installation: Make sure that water cannot accumulate in the horn.
Connect the 2-conductor cable of the loudspeaker to the signal supply.
2
Select the desired transformer tap using the switch.
CAUTION! Do not operate in position 6 (8 Ω) on a 70 V / 100 V system! Damage will be caused!
9