MSW Motor Technics MSW-FBBD-150100D Manual De Instrucciones página 31

TO TRACK THE SANDING BELT
1. Rotate the sanding arm to the desired position and tighten socket head screw to secure.
2. Turn power switch ON.
3. Note whether the belt tends to wander off its track, and to which side (left or right) of the sander.
• If the sanding belt does not move to either side, it is tracking properly.
• If the sanding belt moves to the right (disc side of the sander), turn the tracking knob
counterclockwise 1/4 turn.
• If the sanding belt moves to the left (away from the disc), turn the tracking knob clockwise '/4
turn.
4. Readjust tracking knob another 1/4 turn, as necessary.
3.4. Device use
WARNING: NEVER TOUCH THE SANDING DISC OR BELT WHILE IT IS MOVING, DO NOT TOUCH THE
WORK PIECE AFTER SANDING, IT COULD BE VERY HOT.
WARNING: ALWAYS WEAR SAFETY GLASSES WHEN OPERATING THE SANDER
CAUTION: ALWAYS MAKE SURE THE WORKTABLE AND BACKSTOP ARE PROPERLY ADJUSTED AND
SECURED BEFORE USE.
EN