MESTIC Power Station MPS-1800 Instrucciones De Uso página 21

icon will not flash. (The automatic shutdown setting is to protect the battery from low power; exiting this
setting may damage the battery life, so please use it with caution.)
6. Note: When there is no AC input, long press the AC output button. You can switch the AC off-grid output
frequency (50 Hz/60 Hz ), long press 2seconds to switch. The AC output icon will flash 3 times after
successful switching.
1. Short-press AC output power switch
2. USB output is enabled by default after the main power swich is turned on.
7. After ensuring that the main power is turned on, short-press the AC output power switch to turn on the AC
output. Short-press the AC output power switch again to turn it off.
8. The default standby time of the AC output port is 1 hour. After 1 hour without any load on the AC output
port of this product, the AC output power will be automatically turned off. In normal mode, long-press the
LED light button; the AC output power switch can exit the automatic shutdown setting, and the battery
icon on the screen will flash. Long-press again, and the AC output power switch enters the automatic
shutdown setting, and the battery icon will not flash.
9. Long-press the LED light button to exit the AC automatic shutdown setting: it is applicable to AC equipment
below 10W and pulse working equipment.
10. When the AC output is not in use, turn it off to save power consumption.