Mora MBE3502CAS Instrucciones De Uso página 31

Table continued from last page
Error name Description
Err 005 Overheating of
user interface
Err 007 Failure of power
board relay
supply
Err 008 Overheating of
power board
Err 015 Zero cross failure
on power board
Possible cause Solution
Ambient Check ambient temperature in the
temperature is too room. Cool down the appliances.
high, NTC sensor Disconnect the cooking range from the
is malfunctioning. power mains for a few minutes (undo
the fuse or switch off the main switch);
then, reconnect the cooking range to
the power main. If the problem
persists, contact service.
Check position of pots. Pots position
might influence temperature on the
user interface.
Failure of power Check correct voltage in house
supply. installation. Disconnect the cooking
range from the power mains for a few
minutes (undo the fuse or switch off
the main switch); then, reconnect the
cooking range to the power mains. If
the problem persists, contact service.
Ambient Check ambient temperature in the
temperature is too room. Cool down the appliances.
high, NTC sensor Disconnect the cooking range from the
is malfunctioning. power mains for a few minutes (undo
the fuse or switch off the main switch);
then, reconnect the cooking range to
the power mains. If the problem
persists, contact service.
Failure on Disconnect the cooking range from the
electronics. power mains for a few minutes (undo
the fuse or switch off the main switch);
then, reconnect the cooking range to
the power mains. If the problem
persists, contact service.
EN 31