EN
System Settings
To configure the system settings, press the Down button to enter the Setup
screen when the camera is turned on. On this screen, press the Down button to
scroll through all the settings options. After selecting the setting you want to
configure, press the Down or Up button again to modify the setting, followed by
the OK button to confirm your change.
Tip:
You can press the Mode button to quit the Setup mode.
1. Special Effect
Normal/B&W/Sepia/Negative/Warm/Cold/Red/Green/Blue (Default setting is
Normal)
Choose a desired special effect to make your images more captivating.
2. Microphone
Built-in/External (Default setting is Built-in)
You have the option to select either a built-in microphone or an external one.
3. Power Frequency
50Hz/60Hz/Auto (Default setting is 60Hz)
Power frequency is also known as the line frequency or mains frequency, it isthe
frequency of the alternating current (AC) that is used in most electrical power
systems around the world. If you live in the northeastern area, please set the
power frequency to 60 Hz, meaning the current changes direction 60 times per
second. If you live outside this area, set it to 50 Hz.
4. Language
English/简体中文/繁体中文/Italiano/Español/Deutsch/Français/日本語/한국어
(Default setting is English)
Set the desired system language for your camera interface.
5. Date & Time
MM/DD/YY
12