Uline H-10251 Instrucciones De Montaje página 2

NOTE: Assemble unit on a smooth, non-marring
surface to prevent scratching. Check that all
parts are included.
IMPORTANT! Turn cam lock 1/4 to the right to
lock. Ensure the arrow is pointing to edge of
panel before inserting into the panel's hole.
IMPORTANT! FUNCTION OF CAM LOCK
Ensure the arrow is pointing toward edge of
panel before inserting into the panel's hole.
IMPORTANT! Cam lock pins must be tightened
once inserted into panel. To tighten cam lock
pins, grasp lower part of cam lock pin and
tighten using a Phillips head screwdriver.
TIGHTENING OF CAM LOCK PINS
1. Insert cam lock pin (A) into bottom panel. Insert
cam lock (B) into skirt panel. Attach skirt panel and
tighten cam lock using a Phillips head screwdriver.
(See Figure 1)
NOTE: Cam lock caps can be applied once
cam locks are tightened for a finished look.
Figure 1
A
PAGE 2 OF 9
1/4 RIGHT TURN
FOR LOCKING
Hold when
tightening
Skirt Panel
B
Bottom Panel
B
A
A
ASSEMBLY
2. Insert cam lock pins (A) and dowels (C) into back
panel. Insert cam locks (B) into bottom panel and
fixed shelf. Attach bottom panel and fixed shelf and
tighten cam locks using a Phillips head screwdriver.
(See Figure 2)
Figure 2
Bottom Panel
3. Insert cam lock pins (A) and dowels (C) into right side
panel. Insert cam locks (B) into bottom panel, fixed
shelf, back panel and skirt panel. Attach bottom
and back panels and tighten cam locks using a
Phillips head screwdriver. (See Figure 3)
Figure 3
Bottom Panel
Fixed Shelf
Back Panel
B
C
A
Fixed Shelf
C
A
Back
Panel
Right Side
Panel
B
1223 IH-10251