Uline H-10251 Instrucciones De Montaje página 3

4. Insert cam lock pins (A) and dowels (C) into left side
panel. Insert cam locks (B) into bottom panel, fixed
shelf, back panel and skirt panel. Attach bottom
and back panels and tighten cam locks using a
Phillips head screwdriver. (See Figure 4)
5. Insert adjustable glides (E) into bottom of side
panels. (See Figure 4)
Figure 4
E
6. Insert cam lock pins (A) and dowels (C) into top
panel. Insert cam locks (B) into back panel, right
side panel and left side panel. Attach top panel
and tighten cam locks using a Phillips head
screwdriver. (See Figure 5)
Figure 5
PAGE 3 OF 9
ASSEMBLY CONTINUED
Left Side
Panel
A
C
B
Top
Panel
B
C
A
1-800-295-5510
7. Place cabinet upright. Insert shelf dowels (D) into
side panels. Place shelves inside cabinet and
ensure grooves in shelves lower onto shelf dowels
for secure fit. (See Figure 6)
Figure 6
WALL ANCHOR
1. Attach one bracket of wall anchor to back of top
panel using two M4 x 20 mm screws. Mark holes on
wall where plastic anchors are to be located. Drill
holes using 5/16" drill bit. Mount opposite bracket of
wall anchor to wall with two M4 x 40 mm screws and
two M8 x 36 mm plastic anchors. Tighten cable tie
to prevent tipping. (See Figure 7)
Figure 7
uline.com
D
Top
Back
Wall
1223 IH-10251