Marstek MICRO ESS B2500 Manual De Instrucciones página 9

Adding devices
. After successful login, select "Add Device" in the upper left corner to add a device.
. Scan the QR code (QR code only for M5000) on your device to add the device, or open Bluetooth® on
your smartphone and location sharing on the phone and select the device to add it directly.
. Once the device has been successfully added, the name of your power station is displayed on the
start page.
. Clicking on different devices in the device management page will switch the connection to different
devices,left swipe on IOS system triggers modifying and deleting devices, long press on the device list
on Android system triggers modifying and deleting devices.
Add Device
You haven't added a device yet, try adding
one now!
No device yet, let's try a virtual device first
Equipment home page
.Real-time display the solar charging status, discharge and other status.
. Charging settings: 1. PV1 and PV2 charging the battery for fully charged, then discharged.
2. PV1 and PV2 transmitting to Micro inverter.
<
Add Device
Please choose the following method to
add a device
Only M5000 can choose to add a QR code or
Bluetooth.For other devices,please choose
Bluetooth to add a device
Add via QR code
Add via Bluetooth
No device yet, let's try a virtual device first
<
Enter a new device name
Device ID:
Mac:
Device Type ID:
Add Device
<
<
Device management
Edit
6
Add via Bluetooth
device
name
device
name
Delete
EN