Publicidad
Idiomas disponibles
Idiomas disponibles
EN
prevent burns. Make sure, that the fl oor near the cooker is not slippery. This will allow you to
prevent slips, which can cause severe injuries.
PRODUCT SERVICE
Installation starting and operation of the product
you should unpack the product, completely remove all the elements of the packaging; it is recommended that you keep the pack-
aging, it may be helpful for later transport and storage of the product.
Wash the product in accordance with the instructions from the point "Product maintenance".
Put on the product an appropriate, fi lled vessel.
Connect the power cord plug into the mains wall socket, the control lamp, which is placed over the switch marked "ON/OFF", will
light up, this means, that the product is powered.
When you press the button marked "POWER", the power indication will appear on the display and the control lamp, which is
marked as "POWER" will light up. The power is set by the factory on 2000 W. With the buttons, which are marked with arrow
symbols, you can adjust the power for the range specifi ed in the table. The arrow, which is pointing up, increases the power, and
arrow pointing down lowers the power.
When you press the button marked "TEMP." the temperature display will appear on the display and the control lamp, which is
marked as "TEMP." will light up. The temperature is set by the factory on 120
O
C. With the buttons, which are marked with arrow
symbols, you can adjust the temperature for the range specifi ed in the table. The arrow, which is pointing up, increases the tem-
perature, and arrow pointing down lowers the temperature.
When you press the button marked "TIME", the working time indication will appear on the display and the control lamp, which
is marked as "TIME" will light up. With the buttons, which are marked with arrow symbols, you can adjust the time for the range
specifi ed in the table. The arrow, which is pointing up, increases the time, an arrow pointing down reduces the time.
If, in the course of work, it is pressed on/off switch, which is marked "ON/OFF", this will turn off the cooker. When you turn off the
cooker its fan is working for some time to cool down the cooker systems. At this time, you should not disconnect the product from
its power supply.
After work completion you should turn off the cooker by the pressing the button marked as "ON/OFF", and then remove the vessel
from cooker.
WARNING! When you remove the vessel from cooker you should be very careful. The vessel and cooker plate can are very hot
and can cause serious burns. Use personal protective equipment in the form of gloves and protective clothing.
You should allow the cooker plate to cool down spontaneously, and then proceed to maintenance as described in section "Product
maintenance"
ATTENTION! The cooker will turn off automatically after two hours after the last user's action.
Maintenance of the product
ATTENTION! All maintenance operations must be carried out when the product power supply is turned off . To do this you should
remove the power cord plug from a mains outlet.
Heating plate and other parts of the product should be cleaned by using a cloth soaked in water solution of mild dishwasher liquid.
After the cleaning, you should wipe dry the product. The plate should be cleaned after each use, after it completely cools down.
You should clear all food remains, which have been left on the plate, this will prevent their overcooking during subsequent use,
this will also prevent the performance degradation of product.
For cleaning do not use solvents, aggressive agents, the alcohol gasoline, or abrasive cleaners.
Vents should be cleaned by using a vacuum cleaner.
Attention! Never immerse the product in water or any other liquid.
Storage of the product
If the product will not be used for an extended period of time, you should disconnect it from power supply.
Store the product indoors, protect against dust, dirt and moisture. It is recommended to store the product in the factory packaging.
Store the product in its working position. Do not install the products in layers. Do not place anything on the product during its
storage.
O R I G I N A L
I N S T R U C T I O N S
10
Publicidad
