Publicidad
Idiomas disponibles
Idiomas disponibles
Built to Exceed
3 YEARS
L I M I T E D WA R R A N T Y
3. The tool has variable speed. To increase speed, press the power button for a long period of time, and
slightly release it to decrease speed.
Use
1. Hold the tool rmly and place the socket straight on the anvil. Place the bushing on the nut and hold
the tool rmly pressed against the nut so that the bushing does not slip. Press the power switch to start
screwing.
2. When the nut initially does not resist tightening, the impact wrench works like a normal screwdriver.
When the nut starts to tighten and resists the percussion function it comes into play automatically.
3. The tightening torque varies depending on a wide range of factors. For this reason, check torque with
a torque wrench after tightening.
4. The nal torque achieved after a few seconds of adjustment varies according to the type of nut, dimen-
sion and combination of materials. Therefore, a little practice and experience is needed to determine the
correct tightening time for a speci c torque.
Maintenance
general
Proper cleaning and maintenance of the tool are important for both safety and tool life.
NOTE: Turn tool o and unplug from power source (remove battery / unplug power cord) before clea-
ning and maintenance - risk of electric shock and accidental starting.
Clean the tool with a cloth dampened with water and a few drops of soap or detergent.
Brush hard-to-reach areas with a brush.
NOTE: Do not use cleaning agents that contain solvents or abrasive or corrosive additives, as this can
damage tool surfaces.
9
Publicidad
