Miele HS19 Instrucciones De Manejo página 79

 Unlock the cover on the side of the
Electrobrush so that the  symbol
becomes visible a.
 Lift the cover up as far as it will go b.
 Remove the roller brush that has been
fitted as standard c.
 Insert the Carpet Care roller brush.
 Close and lock the cover.
Hardfloor Care soft roller (HX HC)
(Fig. 29)
(depending on model)
Follow the flooring manufacturer's
cleaning and care instructions.
When fitted with the Hardfloor Care soft
brush, the Electrobrush can be used to
clean delicate hard floors.
Insert the Hardfloor Care soft brush into
the Electrobrush instead of the roller
brush fitted as standard (see "Car-
pet Care roller brush" above) (Fig. 28).
When you use the Hardfloor Care soft
roller, the Electrobrush power con-
sumption is automatically set to the
optimum level – this can lead to a
change in the operating noise.
Electro Compact handheld brush
(Fig. 30)
(depending on model)
Follow the flooring manufacturer's
cleaning and care instructions.

Damage caused by trapped ma-
terial.
Risk of the flooring getting scratched.
Make sure that there is no coarse dirt
or debris trapped in the bottom of
the handheld brush, e.g. shards or
stones.
The handheld brush is particularly suit-
able for intensive cleaning of car seats
and carpeted stairs.
For optimum cleaning results on up-
holstery, use the upholstery nozzle XL.
Tip: The suction tube is not a conveni-
ent option for cleaning car seats or
stairs.
Tip: If you ever need to vacuum up sub-
stantial amounts of coarse dirt or
debris, use the PowerUnit solo (see "In-
stallation and connection – Using the
PowerUnit solo").
Additional battery (HX LA)
(depending on model)
Using the additional battery doubles the
amount of time the vacuum cleaner can
be used for.
Before charging for the first time, you
must read the information in "Installa-
tion and connection – General battery
information".
en
79