Miele HS19 Instrucciones De Manejo página 87

Problem
The vacuum cleaner
does not start when it is
switched on.
The cleaning perform-
ance is poor.
Cleaning performance is
reduced.
Cause and remedy
There is no battery inserted or the battery has been
inserted incorrectly.
 Insert the battery or check how the battery is posi-
tioned (see "Installation and connection" – "Insert-
ing the battery").
The rechargeable battery is not sufficiently charged.
 Charge the battery exactly as described in these
operating instructions (see "Installation and con-
nection" – "General battery information" and
"Charging the battery").
An original Miele battery has not been inserted.
 Insert an original Miele AP01/AP02/AP03 lithium-
ion rechargeable battery (HX LA).
The battery was not placed in the PowerUnit when
charging it for the first time.
 To activate the battery, it must be placed in the
PowerUnit the first time it is charged (see "Install-
ation and connection" – "General battery informa-
tion" and "Charging the battery").
The charging plug is still plugged in.
 Pull the charging plug out of the charging socket on
the bottom of the battery.
The dust container is full.
 Empty and clean the dust container (see "Mainten-
ance").
The Electrobrush is dirty/blocked.
 Clean the Electrobrush (see "Maintenance –
Cleaning the Electrobrush" and "Removing the
roller brush from the Electrobrush").
The fine dust filter/pre-filter is soiled.
 Run the interim cleaning function for the fine dust
filter (see "Maintenance – Activating the Comfort-
Clean function").
 Clean both filters thoroughly (see "Maintenance –
Cleaning the pre-filter and fine dust filter").
The fine dust filter is worn.
 Insert a new fine dust filter (HX FSF-2).
en
87