Miele HS19 Instrucciones De Manejo página 81

Self-standing function for short
pauses in vacuuming
(For safety reasons, this function can
only be used when the PowerUnit is fit-
ted at the bottom of the vacuum
cleaner)
If you are vacuuming with the
PowerUnit fitted at the bottom of the
vacuum cleaner, you can easily interrupt
operation while the appliance is
switched on.
 Swing the vacuum cleaner forwards
until the Electrobrush connector aud-
ibly clicks into place.
The vacuum cleaner stays securely up-
right, the Electrobrush switches itself off
and the battery is conserved.
If you then unlock the connector on the
Electrobrush, the Electrobrush will
switch on again.
Maintenance

Risk of injury caused by rotating
roller brush.
You can injure yourself on the rotating
roller brush.
Switch the vacuum cleaner off before
doing any maintenance work. Use the
On/Off switch on the Comfort handle
to do this.
We recommend using only genuine
Miele accessories bearing the "ORI-
GINAL Miele" logo on the packaging.
Only these will guarantee the optimum
suction power of your vacuum cleaner
and the best possible cleaning results.
Please note that faults and damage
caused by use of accessories which do
not bear the "ORIGINAL Miele" logo
on the packaging are not covered by
the vacuum cleaner warranty.
Purchasing accessories
Original Miele accessories are available
from the Miele webshop, the Miele
Customer Service Department and from
your Miele dealer.
Original Miele accessories are identified
by the Miele logo on the packaging.
With 3D4U, Miele also offers free ac-
cessories to download for your 3D
printer (www.miele.com, Service,
3D4U).
Filter system (Fig. 33)
 Fine dust filter (HX FSF-2)
 Pre-filter
 Dust container
d Dust container flap
en
81