Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
•
Turn the temperature control dial until the desired temperature is aligned with the marking,
as shown below:
Temperature control dial
setting
Min.
Max.
Steam ironing
Before steam ironing
NOTE:
When filling the tank for the first time, please wait 5 to 10 minutes before switching
on your appliance. Not doing so may cause the iron to stop emitting steam.
Filling the water tank
NOTE:
When the iron is not in use, it should always be rested and locked on the base unit.
1.
Ensure that the iron is unplugged from the mains power supply.
2.
Ensure that the temperature is set to the "Min." position on the temperature control
dial.
3.
Pull out the water tank by the tank handle.
4.
Pull open the water tank cover.
Use a suitable measuring vessel and fill it with water.
Then, carefully pour the water into the water tank.
TIP: We recommend that you use 50% demineralised water and 50% tap water. This will
prevent calcium from building up in the iron.
NOTE:
Do not allow the water exceeding the "MAX" level marked on the
water tank.
Fabric type
Minimum soleplate temperature
Silk / nylon / synthetic (e.g. acetate,
acrylic, viscose, polyamide,
polyester...)
Wool
Cotton and linen (with or without
steam)
Maximum soleplate temperature
19
EN
Is steam ironing
possible?
NO
NO
NO
YES
YES
Publicidad
