Cleaning And Maintenance - HIGHONE 974449 Instrucciones De Uso

C

Cleaning and maintenance

Cleaning and maintenance
• Always unplug the unit from the mains power socket and allow
it to cool down for approximately 30 minutes before cleaning it.
• Drain the remaining water in the water tank to prevent it from
leaking during cleaning.
• Do not use solvents or abrasive products to clean the iron. Wipe
the iron with a soft, damp cloth and dry it thoroughly.
• To remove any build-up of calcium and limscale around the
steam holes, use a cotton wool tip dampened with methylated
spirits. Wipe off the methylated spirits with a soft, damp cloth
and dry it thoroughly.
• Regularly clean your unit and keep it dust free to reduce the
need for repairs and ensure product longevity.
• Clean the unit with a slightly damp, soft cloth. Make sure that
no liquid enters the inside of the unit.
• When cleaning the unit, never use abrasive detergents, metal
brushes, scouring or metal foams, or sharp utensils.
• Never immerse the unit, cable or plug in water or any other
liquid.
Malfunction and repair
• Should the power cable become faulty, do not attempt to replace
it yourself. The unit must be taken to an authorised repair centre.
23 EN