KitchenAid KSMMGA Manual De Instrucciones página 5

PRODUCT ASSEMBLY
ASSEMBLING THE METAL FOOD GRINDER ATTACHMENT
Wash all parts with warm, soapy water and dry carefully before use.
1.
Insert the Grind Screw into the Main Housing. Then, place the Blade over the end of the
Grind Screw. The Blade should fit entirely inside the housing. If it doesn't, pull it off, turn it
over, and place it again.
2.
Place Grinding Plate over the Blade, matching the Notch of the plate with the Tab on the
bottom of the Main Housing.
3.
Place the Collar on the Main Housing, turning clockwise by hand until secured but not
tightened.
A
B
A. Tab
B. Notch
5