Publicidad
Idiomas disponibles
Idiomas disponibles
X i D
1 9
Keep Working
Removing drill bits / screwdriver bits
Open the chuck by rotating the chuck collar and remove the drill bit.
IForward/Reverse switch (1)
shown on the forward/reverse lever
1. Set the Left/right switch to
2. Change the direction of rotation only when the machine is not in operation!
On/off switch (2)
To switch on the tool, press the on/off switch
To switch off the tool, release the on/off switch
Variable speed
To start drilling squeeze the variable speed trigger. To stop drilling release, the trigger.
Note: The more the trigger is depressed, the faster the drilling bit will rotate.
Caution: Operating the machine with a low speed for a long time will increase the risk that the motor will be overheated. To
prevent overheating, let the motor cool down regularly (Stop using the machine for 15 minutes).
KEEP WORKiNG
05
Publicidad
