Publicidad
Idiomas disponibles
Idiomas disponibles
● Medium
● High
Switching off the cleaning robot
Note
The cleaning robot cannot be switched
off when it is on the charging station.
Note
Fully charge the cleaning robot before
longer work stoppages.
ATTENTION
Damage due to moisture
Remove the wiper cloth with the wiper
cloth holder, see chapter Removing the
wiper cloth holder.
Remove the water reservoir, see chap-
ter Removing the water reservoir.
1. Keep the On / Off button pressed
when the cleaning robot is in stand-
by and not on the charging station.
The cleaning robot switches off.
Interrupting the cleaning
1. Press any key during cleaning.
The cleaning robot stops.
2. Press the On / Off button.
The cleaning process continues.
3. Press the "Back to charging station"
key.
Cleaning is canceled and the clean-
ing robot returns to the charging sta-
tion.
Manually send the cleaning
robot for recharging
1. If the cleaning robot is moving, press
any key.
The cleaning robot stops.
2. Press the "Back to charging station"
key.
The cleaning robot moves to the
charging station for recharging.
The cleaning robot automatically re-
turns to the charging station for re-
charging when it has completed a
16
cleaning task or when it is low on ener-
gy during a cleaning operation.
1. If necessary, empty the dust con-
tainer, see chapter Emptying the
dust container.
2. Insert the dry wiper cloth into the
wiper cloth holder, see chapter In-
stalling the wiper cloth.
3. Press the On / Off button.
The cleaning robot starts cleaning.
Note
After emptying the water reservoir,
drops may remain in the hoses. If the
cleaning robot is started with an empty
water reservoir, these drops can be
discharged.
ATTENTION
Damage to the water reservoir due
to corrosion and chemical ingredi-
ents
Do not fill cleaning agents, disinfec-
tants or other cleaning products into
the water reservoir.
Do not fill hot water into the water res-
ervoir.
Do not immerse the water reservoir in
water.
Dry the metal contacts of the water res-
ervoir before inserting the water reser-
voir.
1. Press any key.
The cleaning robot stops.
2. Remove the water reservoir, see
chapter Removing the water reser-
voir.
3. Fill with water.
English
Dry wiping
Wet wiping
Publicidad
