Publicidad
Idiomas disponibles
Idiomas disponibles
(LiDAR) should never come into con-
tact with the ground or objects.
Do not place any objects on the clean-
ing robot.
Store the cleaning robot fully charged
and switched off in a cool and dry
place.
Note
To avoid deep discharge of the battery,
fully recharge the cleaning robot after 5
months at the latest.
1. Clean the cleaning robot, see chap-
ter Cleaning.
2. Fully charge the cleaning robot, see
chapter Manually send the cleaning
robot for recharging.
3. Unplug the charger from the power
outlet and the station.
4. Switch off the cleaning robot, see
chapter Switching off the cleaning
robot.
5. Store the cleaning robot in a cool
and dry place.
Care and service
Cleaning
Cleaning the dust container
1. Press any key.
The cleaning robot stops.
2. Remove the dust container, see
chapter Removing the dust contain-
er.
3. Empty the dust container, see chap-
ter Emptying the dust container.
ATTENTION
Damage to electronic components
Do not clean the dust container with a
damp cloth.
4. Clean the dust container with the
cleaning tool provided.
5. Close the filter flap.
6. Install the dust container, see chap-
ter Installing the dust container.
7. Press the On / Off button.
The cleaning process continues.
Cleaning the water reservoir
1. Press any key.
The cleaning robot stops.
2. Remove the water reservoir, see
chapter Removing the water reser-
voir.
3. Turn the water reservoir upside
down and empty it.
4. Clean the water reservoir.
5. Push the water reservoir horizontally
into the cleaning robot until it audibly
engages.
6. Press the On / Off button.
The cleaning process continues.
Cleaning the filter
We recommend cleaning the filters
regularly. This prevents them from be-
coming clogged.
1. Press any key.
The cleaning robot stops.
English
19
Publicidad
