Publicidad
Idiomas disponibles
Idiomas disponibles
4.2 Switching on and off
To switch on the appliance, insert the plug
into the wall socket.
When the appliance is switched on for
the first time, the interior light may turn on
after a one-minute delay due to opening
tests.
To switch off the appliance, unplug it.
4.3 Temperature regulation
Recommended set temperature is:
• +4°C for the fridge.
The temperature range may vary between
2°C and 8°C.
To set the temperature of the appliance,
press the temperature regulation button
repeatedly until you reach the desired
temperature of the compartment.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
4.4 Super Cool function
If you need to insert a large amount of food at
ambient temperature into the fridge
compartment, for example after doing the
grocery shopping, we suggest activating the
Super Cool function to cool the products
more rapidly and to avoid warming another
food which is already in the compartment.
This function stops automatically after a
maximum of 5 hours or when the sensor
reaches the lowest temperature for the fridge
compartment (1-3°C).
You can deactivate the Super Cool function
before its automatic end by repeating the
procedure until the Super Cool indicator turns
off or by selecting a different temperature of
the fridge compartment.
4.5 Alarm
In case of cooling issues, power interruptions
or significant temperature changes inside
your appliance, the alarm indicator lights up
red and the sound is on.
The alarm may light when you plug the
appliance for the first time.
Refer to the "Troubleshooting" chapter for
more possible causes of triggering the alarm,
and solutions on how to deactivate it.
4.6 Standby mode
Activate the Standby mode to switch off the
cooling function and therefore lower the
energy consumption of the appliance.
To activate the Standby mode:
1. Set the temperature for 2°C. Refer to the
"Temperature regulation" section.
2. Press and hold the temperature
regulation button until all temperature
indicators blink 3 times.
If you press the temperature regulation
button while the Standby mode is on, all
temperature indicators blink 3 times.
You can deactivate the Standby mode by
repeating the above procedure.
During the Standby mode, the
temperature inside the appliance may
rise above the set 2°C. If that happens
after the mode deactivates, the alarm
indicator lights and the sound is on.
When the appliance automatically lowers
the temperature, the alarm indicator and
the sound alarm deactivate.
ENGLISH
9
Publicidad
