Publicidad
Idiomas disponibles
Idiomas disponibles
(Figure 1)
(FIGURE 2)
● OPERATION
The FAN may be operated by the manual controls located on the FAN (as
shown in FIGURE 2)
1. Place the FAN on a stable flat surface. Plug the cord set into a
220-240V~A.C. electrical outlet.
2. Speed : Press '0' – Off, '1' – low fan speed, '2' – medium fan speed and '3' =
High speed.
3. Oscillating : press the 'osc' button, then the unit will oscillate, if you want to
stop the oscillating, just press the 'osc' again.
● MAINTENANCE
1. This can only be done by an authorized service agent such as your local
Sealer dealer or any agent qualified to undertake electrical repairs.
2. If the unit requires external cleaning make sure it is switched off and
unplugged from the mains supply. Use a soft tissue or cloth for general clean-
ing. To remove more persistent dirt or grime wipe down with a cloth that has
been dampened with warm soapy water. Do not use any solvents (such as
thinners) as these may damage the plastic casing.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appli-
ance.
-4-
Publicidad
