Yoer DE01W SECCO Instrucciones De Uso página 43

ENGLISH
Displays functions:
After plugging the device in, the displays will show current humidity level.
After setting the preferable humidity, the displays will show selected humidity level.
After setting the timer, the displays will show the remaining time.
NOTE:
If the humidity in the room is lower than 20%, the displays will show 20.
If the humidity in the room is higher than 90%, the displays will show 90.
DEVICE INSTALLATION
CAUTION: Before turning on the air conditioner keep it a vertical
position for at least 2 hours.
CAUTION : Keep the appliance at least 20cm away from the
wall or any other objects.
USING THE DEVICE
TURNING ON
Plug in the device. The indicators on the control panel will turn on automatically then they will
turn off after a few seconds. The ON/OFF indicator will turn on.
Press to turn on the device. During the initial use of the device, it will be set to the default
operating mode. The device will start operating at a low speed and with daytime mode.
The following settings can be adjusted using the control panel or mobile application.
43