Yoer DE01W SECCO Instrucciones De Uso página 48

CLEANING AND MAINTENANCE
NOTE: Before cleaning, turn off the device and disconnect it from the power source.
1. Use a slightly damp cloth to clean the external surface of the device. Before using
the dehumidifier again, thoroughly dry the cleaned surface with a soft, dry cloth.
2. Use cold or lukewarm water to clean the water tank. Do not use detergents,
scrubbing brushes, or soaked cleaning cloths.
3. Do not use any abrasive chemicals or cleaning agents such as alcohol, gasoline, or
solvents, as they may damage the device.
4. Prevent water from entering the device's openings.
CLEANING THE AIR FILTERS
If the filter cleaning indicator lights up, it means the filters need cleaning. Please clean
the filters.
TIP: The frequency of cleaning the filters depends on how long and under what conditions
they are used. However, remember that a dirty filters restricts airflow and reduces the
device's efficiency. It is recommended to clean the filters regularly, once every two weeks.
1. The filters are located in the rear housing of the device.
2. Remove the grille to which the filters are attached and gently take out the filters.
3. Clean the filters from dust using a dry cloth. If the filters are heavily soiled, immerse
them in warm water (never hotter than 40 ºC).
4. Allow the filters to dry completely before reinstalling it.
5. Align the filters with the grille and securely reattach them to the device.
6. After cleaning the filters, press
the machine starts to record the filters using time again.
ENGLISH
, then the filter cleaning indicator will stop flashing,
48