Yoer DE01W SECCO Instrucciones De Uso página 45

AUTO POWER ON
To set the time after which the dehumidifier is to turn on, enable the timer in the mobile app
or press the button when the device is in standby mode. Select the number of hours in
the 0.5-24h range by pressing
time, the numbers will be blinking. To apply the setting wait for them to stop blinking. The
timer indicator will then light up on the device panel. To cancel it, press the
PARENTAL LOCK FUNCTION
To turn on the child lock (lock the control panel), press and hold
characteristic beep sound. The device will no longer respond to button presses. To deactivate
the lock, press and hold the button again until you hear the characteristic beep sound
WI-FI FUNCTION
To turn on the Wi-Fi function, press and hold at the same time
characteristic beep sound. The Wi-Fi indicator will be blinking on the panel.
RESET FILTER CLEANING INDICATOR
Press to turn off the filter cleaning indicator.
PUMP FUNCTION
This function enables continuous drainage. To use this function, follow the instructions in the
EMPTYING THE WATER TANK section.
Additional features:
Memory function - The device remembers the selected settings in the event of a power
failure.
Frost protection function - During operation, when the compressor temperature becomes
too low, the frost protection function will automatically activate. When the temperature rises
to a specific value, the device will automatically return to its previous state.
ENGLISH
and until the desired time is reached. While setting the
45
button again.
until you hear a
.
and until you hear a