Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Care before installation
Before installing the appliance and connecting it to the power, wash the interior and
all internal accessories with lukewarm water and some neutral soap so as to remove
the typical smell of a brand-new product, then dry thoroughly.
Never use detergents or abrasive cleaners, they will damage the inside
coating.
When using the appliance for the first time or after a period of non-use, before putting
the food in the compartment let the appliance run at least two hours on the higher
settings.
Location
Warning! Never expose the appliance to a naked flame.
•
Install the appliance in a dry and well-ventilated place.
•
The appliance should be located far from heat sources like radiators, boilers, sunlight,
etc.
•
Your appliance is designed to function optimally at a given ambient temperature.
In this case, it is said to be designed for a particular "climate class". The climate
class is clearly shown on the ID plate (see the "Contact" chapter). The refrigerator
may not maintain satisfactory inside temperatures if it operates outside of the
temperature limits set for the "climate class" it is designed for. Ensure that the
chosen location is compliant with these temperature limits:
Class
Ambient temperature
SN
This refrigeration appliance is designed for use at ambient
temperatures between
10°C and 32°C
SN-ST
This refrigeration appliance is designed for use at ambient
temperatures between
10°C and 38°C
SN-T
This refrigeration appliance is designed for use at ambient
temperatures between
10°C and 43°C
N
This refrigeration appliance is designed for use at ambient
temperatures between
16°C and 32°C
ST
This refrigeration appliance is designed for use at ambient
temperatures between
16°C and 38°C
T
This refrigeration appliance is designed for use at ambient
temperatures between
Publicidad
