Descargar Imprimir esta página

Joie alore Manual De Instrucciones página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
Use Shoulder & Waist Harnesses
see images
-
18
21
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the shoulder
and waist harnesses are at proper height and length.
- 1
Shoulder harness anchor A
18
- 2
Shoulder harness anchor B
18
- 3
Slide adjuster
18
For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder
harness anchor B and the lowest shoulder slots.
!
The position of the shoulder belt anchor can be adjusted from above opening which closed by fasterners or
below pocket.
- 1
19
To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing forward.
Thread it through the shoulder harness slot from back to front.
child's shoulder height.
20
Use slide adjuster to change the harness length.
21
Press the button
-
2, while pulling the waist harness to proper length.
21
Adjust Calf Support
see images
-
22
23
The calf support has 2 positions.
To raise the calf support, push it upwards.
A "click" sound means the calf is locked completely.
22
To lower calf support, press the adjustment buttons on both sides of the calf support
support downwards.
- 2
23
Use Front Swivel Lock
see image
24
Front wheel locked or unlocked status as
.
24
Tip
It is recommended to use swivel locks on uneven surfaces.
Use Brake
see images
-
25
26
To lock wheels, step the brake lever downwards.
25
To release wheels, just lift the brake lever upwards.
Tip
Always set the parking brake when stroller is not moving.
Use Canopy
see images
-
27
28
The canopy can be opened or folded, pull it toward front or back.
The canopy can be opened completely to protect your child from the sun uttermostly, just unzip the zip
then pull the canopy toward front.
There is a window on the canopy, through which you can view your baby.
Adjust Handle
see image
29
The handle has 3 positions.
Adjust Seat Height
see images
-
30
31
The seat has 3 positions.
Pull up the seat to increase the seat height.
30
Press the seat height adjustment buttons and pull up, then push down to decrease the seat height.
19
Rethread it through the slot that is closest to
19
- 1
- 3
21
-
1, and rotate the calf
23
26
28
31
Switch Seat
see images
-
32
38
The seat can be switched which makes mother and child can face to face with each.
Squeeze the seat release buttons while lifting the seat. Turn the seat to reverse direction and then insert the seat to
seat mounts.
Both seat mounts need to be level shown as
height adjustment button and pull up, then push down to decrease the seat height to make sure the both seat
mounts to be level.
Use Storage Basket
see image
39
To prevent a hazardous, unstable condition, do not place more than 4.5kg in the storage basket and storage
bag.
Fold Stroller
see images
-
40
43
!
Please fold the canopy before folding the stroller.
Press the folding button and pull up,
automatically.
42
!
If the seat is on the lower position, it can slide down while folding the stroller to make sure fold latch lock
automatically.
!
Please do not fold the frame when the seat is facing rearwards.
!
Please do not fold the frame when front wheel swivel lock is locked.
!
The stroller with forward-facing seat can stand when the handle is in the highest position.
Use Accessories
Accessories may be sold separately or may not be available depending on region.
Use Rain Cover
see image
44
To assemble the rain cover, place it over the seat.
!
When using the rain cover, please always check its ventilation.
!
When not in use, please check that the rain cover has been cleaned and dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain cover during hot weather.
Use with Infant Child Restraint
see images
-
45
49
, and
27
When using with Joie infant child restraint i-Snug 2 & i-Gemm 3 & i-Level Recline & i-Jemini & Gemm, please
refer to the following instructions.
!
A "click" sound means the adapter is locked completely.
!
The infant child restraint angle can be adjusted with our adjustable adaptors.
!
The adapter has 3 positions. Please do not use the product when the baby's head is lower than feet after
attached infant child restraint.
!
If you have any problems about using the infant child restraint, please refer to their own instruction manuals.
!
Please do not fold the stroller when the infant child restraint is still attached.
, if the situations shown as
33
36
then rotate the handle downwards,
40
43
&
happen, please press the seat
34
35
the fold latch can lock
41
47
20

Publicidad

loading