SCALANT Scarlo 1000 Instrucciones De Montaje página 23

Scarlo 1000 Outside Staircase Assembly Instructions
5) Assembly
Step 6
Assemble the railing screw-on sleeves (pos. 8) on the outside of the
stringers with the cylindrical screws (pos. 15) (Fig. 1) and tighten them. Then
lightly turn the grub screws (pos. 9) into the thread of the sleeves using an
Allen key (Fig. 2).
1
Step 7
Now insert the railing rods into the sleeves from above and allow them to
protrude approx. 16 cm downwards (Fig. 1). Then clamp the railing rod in
place with one of the grub screws so that it cannot slip any more.
Now connect the two parts of the handrail holder (pos. 10) using the screw
(pos. 19). Then place the handrail holder on the railing rod and screw the
parts together with the screw (pos. 17).
1
2
2
-23-