Publicidad
Idiomas disponibles
Idiomas disponibles
Scarlo 1000 Outside Staircase Assembly Instructions
5) Assembly
Step 12
Now assemble the railing for the platform. To do so, fasten the railing screw-
on sleeve (pos. (8) to the side on the platform using the screw (pos. 15).
Lightly turn the grub screw (pos. 9) into the screw-on sleeve.
The straight railing rod (pos. 30) is now inserted into the screw-on sleeve so
that the railing rod is flush with the lower end of the grub screw and
clamped with the grub screw.
1
Step 13
Then insert the handrail holder (pos. 10) into the railing rod and fasten with
the screw (pos. 17). Now place the handrail onto the handrail holder and
fasten it temporarily with the supplied cable ties (pos. 16). Once everything
is aligned, mark the holes with a pencil and pre-drill with a drill bit (Ø 4 mm).
Then remove the countersunk screws (pos. (18) and screw the handrail
holder to the handrail pipe.
1
2
2
-26-
Publicidad
