Pioneer HTP-55 Manual De Instrucciones página 21

1
2
3
Directly inputting the frequency [Direct Access (remote control unit only)]
2
1
7 7 7 7 7 Selecting a broadcast station using the main unit
1. Press the POWER ON/OFF button.
4
2. Press the FM or AM button and select an FM or AM broadcast.
3. Press the TUNING -, + button and select the broadcast station.
The TUNED indicator lights when broadcast is received. Refer to "Selecting
broadcast station" .
4. Adjust the volume.
The TUNED indicator will not light when a broadcast station is too far away
or when the broadcasting signal is weak.
1.
Set the FM or AM
function.
2.
Select the TUNER
operations.
3.
Set the direct ac-
cess mode.
3
4.
Select the broad-
cast station.
4
Press the numbers
of the frequency to
be received in or-
der.
7 7 7 7 7 Canceling Direct Access
Direct Access can be canceled by pressing the D.ACCESS button again.
OPERATIONS
21
En