TENTECH MTD 20KWe Manual De Uso página 20

Reading resolution
Output power and Current
Battery status checking
Audible alarm
Power supply
Battery charger
Operation temperature
Storage temperature
Humidity
Equipment weight
Dimensions
Included accessories
: 0.01Ω in the resistance measurement.
0.1V in the voltage measurement.
: The output power is less than 0.5W, and the
output current is limited to less than 15mA (Peak
to peak)
: It makes it possible to verify the battery charge
status under normal use conditions.
: It warns the operator in case that there are
abnormalities in the current circuit, which make it
difficult to obtain a reliable result.
: By means of an internal rechargeable battery or
from a 12 V external battery.
: It is supplied by means of an external power
supply for 100-240 V∼
equipment) or from a 12 V car battery.
: 14°F to 122°F (-10°C to 50°C)
: -13°F to 149°F (-25°C to 65°C)
: 95% RH (without condensation)
: Approx. 5.3 lb (2.4 kg) without accessories
: 8.70" x 7.44" x 3.89" (221 x 189 x 99 mm).
: • Four steel rods.
• Connection wire to supply the charger with a
12 V external battery (the car battery).
• Battery charger power supply, 100-240 V∼ input
voltage.
• One 131.23 ft (40 meters) cable in red colour.
• Two 65.62 ft (20 meters) cable in blue and
green colour.
• One 16.40 ft (5 meters) cable in black colour.
• One 16.40 ft (5 meters) cable to connect to the
grounding system to be measured.
• Canvas bag.
• This User's guide.
21
(provided with the